MF350 UTV Mounted Stock Feeder

MF350 UTV Mounted Feeder

MF350 UTV Mounted Livestock Feeder / Sheep Snacker is the perfect tool for feeding sheep, cattle and other livestock in a easy and effective manner, for fitment in UTV or 4×4 pickup bed.

– 300kg capacity spaced drop sheep / cattle feeder

-Electric operation and digital counter

– Fully galvanised, robust construction

Category: .

Product Description

The MF350 Mounted Stock Feeder (Sheep Snacker) is an electric drive spaced-drop feeder designed for fitment into a UTV or 4×4 pickup bed. Featuring fully galvanised all-steel construction & electronic operation with high-visibility digital counter ensure the right amount of feed is dispensed, exactly where you want it. Simple fitment into most popular UTV’s, with drop deflection to allow use with a trailer.


MF350 Mounted Sheep Snacker Feeder
Don’t mess around with bagged feed and troughs, the MF350 Livestock Feeder / Sheep Snacker allows you to drop the right amount of feed in the right place each time. Drop size is variable from 0.5kg to 2kg (approx), and drop spacing is controlled by the forward speed of the UTV or 4×4. Based on the same running gear as the TF350 Trailed feeder, the drive system and electronics are tried and tested. Furthermore the control module is interchangeable bewteen mounted and trailed models!  The digital counter ensure you know exactly how much has been deposited, and allows you to focus on checking stock condition. Operable as either a count-up timer, from o drops upwards, or as a countdown counter, whereby the desired number of drops is set, and the machine will deposit exactly that amount of feed, simply and reliably each and every time. Simple design, quality construction, and galvanised finish for a long lasting, reliable machine.

MF350 sheep snacker / stock feeder mounted in UTV pickup bed. Manufactured by Chapman Machinery Ltd


TF350 Trailed Feeder Control Box

Electronic Drive
The electronic drive system on the MF350 & TF350 stock feeder has few moving parts, and only rotates when in operation, reducing wear and tear, and allowing towing over longer distances. All electronic components are IP67 rated, for use in the toughest conditions. Operation is simple even when wearing thick winter gloves, and the large , brightly backlit display is easy to read even in the worst conditions. The countdown function is ideal for reliably dropping exactly the right amount of feed and freeing the operator to focus solely on checking stock condition. The control unit when off consumes minimal power, so will not flatten batteries if hard-wired onto the towing vehicle.

Quality
The MF350 Mounted sheep snacker by Chapman Machinery is designed to be exceptionally strong, yet lightweight enough for use in wet, wintery conditions. The fully galvanisd hopper is made from robust 2mm folded steel, for strength yet without being excessively heavy – the entire MF350 weighs around 90kg when empty, allowing you the full 300kg max feed capacity (depending on UTV load limits)!  The drop deflector allows use with a trailer, depositing the feed on the clean ground between the wheels of the towing vehicle and trailer (if used with a trailer).
MF350 Mounted Feeder for UTV depositing feed

Reviews

There are no reviews yet.

Be the first to review “MF350 UTV Mounted Feeder”

Dimensions

MF350 Mounted Feeder Dimensions Drawing

 

Range

MF350 –  300 Litre capacity galvanised steel hopper (approx 250kg feed), PVC tonneau covers & electronic control box as standard

Technical Specification

Capacity  300 litre (approx. 250kg feed)

Weight 90kg (Unladen)

Drops per minute 25

Drop size 0.25-2kg (min / max may be limited by feed type)

Supply Voltage 13.8V Nominal [10v / 18v (min / max)]

Operating Temperature -15/+50°C (min/max)

Incorrect Polarity Protection Yes

Overload Thermal Rest Time 30 seconds

MF350 UTV Mounted Sheep Snacker Feeder Chute DeflectorMF350 Low height gives good rearward visibilityMF350 Low Filling Height for easy loadingMF350 Drop Deflector allows use with trailersMF350 Drop Mechanism and discharge chuteMF350 UTV Mounted Sheep Snacker for UTV Mounted Stock feeder for sheep and cattleMF350 Mounted Sheep Snacker for UTVsMF350 Mounted Feeder for UTV depositing feedMF350 sheep snacker / stock feeder mounted in UTV pickup bed. Manufactured by Chapman Machinery Ltd

Additional Control Box – Additional control box to allow machine to be used on an additional towing vehicle without swapping the control electrics over – ideal if the feeder is used on multiple vehicles, eg. ATV and 4×4. Interchangeable with controls for towed TF350 version.

MF350 UTV Mounted Feeder ManualFile Size: 1mbType: pdf

Product BrochureFile Size: 7mbType: pdf

MF350 Parts DrawingFile Size: 170kbType: pdf

Product Enquiry